Trucker's hitch

From ScoutWiki, For Everyone, Everywhere involved with Scouting and Guiding...
Revision as of 20:59, 26 December 2009 by Bot egel (talk | contribs) (Robot: Automated text replacement (-\[\[(Truck)\]\] +\1); cosmetic changes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Trucker's hitch
Names Trucker's hitch, Lorry Hitch, Haymaker's Hitch, Harvester's Hitch, Dolly Knot
Category hitch
Origin Ancient
Releasing Non-jamming
Typical use Making a rope very tight, such as to secure an object to a vehicle
Caveat None
ABoK #2124

The trucker's hitch is a self-binding knot commonly used for securing loads on trucks or trailers.

The first section of the hitch is a double-twisted version of a slipknot loop. With the right hand, grab the rope and make a (fold) loop about one foot long, holding the base of the loop with the left hand. Twist the left hand twice (once would be a standard slipknot) and insert the right-hand end of the loop through the twist. (The base of the loop should look like a double figure eight knot.)

The second section of the hitch tightens and secures the load to a securing point (or an existing section of rope).

Fold the rope again to the right of the first knot, and loop this double-strand around the securing point. Bring the double-strand back and through the first knot's loop, tighten (you can hold the hitch tight with the left thumb and forefinger) and tie a doubled two half hitches around the tight double-strand to secure the line. You may then continue to use the right-hand side of the rope for more securing.

The hitch may be released (or retightened) by loosening the doubled two half hitches.

Advantages

  • Non-jamming
  • Can be tied anywhere in the standing part of the line
  • Works like a pulley, providing 3:1 mechanical advantage in tensioning
  • Multiple hitches can be cascaded, giving 5:1 and higher mechanical advantage

External links