Fireman's chair knot

From ScoutWiki, For Everyone, Everywhere involved with Scouting and Guiding...
Revision as of 22:31, 30 March 2007 by KonttiBot (talk | contribs) (This article was propably imported from Wikipedia, http://en.wikipedia.org/wiki/{{PAGENAME}})
Jump to navigation Jump to search
Fireman's chair knot
Names Fireman's chair knot, Chair knot
Category loop
Related Handcuff knot, Sheepshank, Tom fool's knot
Typical use Makeshift rescue harness or handcuffs
ABoK #1140


A Fireman's chair knot (or simply chair knot) is a knot tied in the bight forming two adjustable, lockable loops. The knot consists of a Handcuff knot finished with a locking half hitch around each loop.[1] The loops remain adjustable until the half hitches are tightened.

Usage

Made in suitable rope by trained personnel this knot can be used as a rescue harness capable of supporting a person while they are lowered to safety. One loop supports the body, around the chest and under the arms, and the other supports the legs, under the knees. Tied towards the middle of a line, one end is used for lowering and the other manned below to control the victim's position with respect to hazards during the descent.[2] A snug fitting of this knot should not allow the person to fall, even if unconscious.[citation needed]

Use as a sling

References

  1. Comhairle Na Seirbhísí Dóiteáin (Fire Services Council), Fire-Fighter Handbook – First Edition, April 2001, 4.106. (Retrieved on 2007-02-18 from [1])
  2. Geoffrey Budworth, The Ultimate Encyclopedia of Knots (London: Hermes House, 1999), 206.