Anchor bend: Difference between revisions

From ScoutWiki, For Everyone, Everywhere involved with Scouting and Guiding...
Jump to navigation Jump to search
m (robot Removing: pt:Nó Fateixa)
m (Robot: Automated text replacement (-\[\[(Anchor)\]\] +\1))
 
Line 19: Line 19:
after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object--this will make for a 1-diameter longer span
after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object--this will make for a 1-diameter longer span
of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible).
of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible).
It is the accepted knot for attaching [[anchor]]s (or more usually anchor chains) to [[warp (disambiguation)|warp]]s. The knot is very similar to a [[round turn and two half hitches]] except that the first [[half hitch]] is passed under the turn.  In many everyday uses, the finishing half-hitch need not be made;
It is the accepted knot for attaching anchors (or more usually anchor chains) to [[warp (disambiguation)|warp]]s. The knot is very similar to a [[round turn and two half hitches]] except that the first [[half hitch]] is passed under the turn.  In many everyday uses, the finishing half-hitch need not be made;
alternatively, one might seek surer security by tying off the end with a Strangle knot to the standing part.
alternatively, one might seek surer security by tying off the end with a Strangle knot to the standing part.



Latest revision as of 12:28, 6 May 2012

Anchor bend
AnchorBend FinalKnot.jpg
Names Anchor bend, Fisherman's Bend
Category hitch
Releasing jamming
Typical use attaching a rope to a ring or similar termination
ABoK #1723 and #1841


The Anchor Bend is a knot used for attaching a rope to a ring or similar termination. Its name originates from the time when "bend" was understood to mean "tie to", and not restricted to knots that join rope ends. While the knot can become jammed in some modern materials, it is usually easily untied after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object--this will make for a 1-diameter longer span of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible). It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn. In many everyday uses, the finishing half-hitch need not be made; alternatively, one might seek surer security by tying off the end with a Strangle knot to the standing part.

Anchor bend step by step

External links